# Asset View (beta)

> Point the phone at a mechanical room and see each asset labelled in the camera view. Scan a room once in the Field app, then pin assets on the phone or on the room in 3D in the web app.

Source: https://app.assetlab.ca/docs/mobile/asset-view

> [!note] Asset View is in beta and is available as an add-on on any plan. To add it to your organization, contact AssetLab.

Asset View labels your assets in the camera view of the AssetLab Field iPhone app. Open a mechanical room, plant room or boiler room, look around, and each pinned asset shows its tag and name where it sits, including ones behind a panel or above a ceiling tile. Tap a label to open the asset.

## What you need

- **AssetLab Field for iPhone or iPad** ([Get the apps](/docs/mobile/install)). Asset View is not in the Android app yet.
- **A device with a LiDAR scanner** - an iPhone or iPad Pro model. Rooms are recognised by their shape, which needs LiDAR.
- **The right role.** Administrators scan rooms and place pins. Staff and Managers open rooms and see the labels. Requesters do not see Asset View. See [Roles & access](/docs/start/roles-and-access).

## Scan a room

An Administrator does this once per room, in the Field app:

1. Scan the room's [location QR code](/docs/asset-management/qr-codes) and choose **Asset View**.
2. Tap **Scan this room** and walk slowly around the whole room with the camera until the scan saves.
3. Aim the **+** at an asset, tap **Pin** and choose it from the list. Only that room's assets are listed. Pins save as you go.

After that, anyone on staff who opens the room sees every pinned asset labelled. Each scan appears in the web app under **Sites → Locations**, in the **Room scan** column, with the scan date and the number of assets pinned.

## View a room in 3D in the web app

Any scanned room can be opened in 3D from the web app: on **Sites → Locations**, click **View in 3D** in the room's **Room scan** column.

Drag to turn the room, scroll to zoom, and right-drag or two-finger drag to pan. Pinned assets show as labelled dots, and the list beside the room names each one.

The **Display** panel beside the room changes how the scan is drawn, for you only. It does not change the scan or any pin:

- **Points** or **Solid**: Solid draws each point as a larger disc, so walls and equipment read as surfaces.
- **Point size**: make the points or discs larger or smaller.
- **Cut off above**: hide everything above a height, to look down into the room past the ceiling and ducts.
- **See through near walls**: hide the walls and ceiling facing away from you, so you can see inside as you turn the room.
- **Clean up noise**: remove stray points and flatten fuzzy surfaces.
- **Colour by height**: shade from blue at the floor to orange at the top, to tell high equipment from low.
- **Room dimensions**: draw a box around the room with its length, width and height, show its floor area under the switch, and add each pinned asset's height above the floor to its label. The box lines up with the walls and ignores stray points seen through windows and doors.

Your settings save to your account as you change them: every room you open in 3D then uses them, on any browser you sign in to. **Reset to default** puts the default view back and saves that too.

To measure between two spots, click **Measure**, then click the first and second points on the scan. The line is labelled with its length, and the list shows how much of it is level and how much vertical, for checking a doorway or clearance. Keep clicking pairs to measure more; **Clear** removes them and **Done** stops measuring. Measurements are not saved and disappear when you leave the page. Anyone who can open the room can measure.

> [!note] Sizes come from a phone's depth sensor and are accurate to a few centimetres over a room. Use them for planning and clearances, not for ordering parts cut to size.

Administrators can also manage pins here:

1. Click **Pin an asset**, then click the spot on the scan where the asset sits.
2. Choose the asset. Assets in that room are listed first, then the rest of the building.
3. Click **Pin here**.

Use the buttons beside a pin in the list to move it (then click its new spot) or unpin it. A pin placed or moved in the web app shows on the phone the next time someone opens that room, with no app update.

> [!tip] The scan is a cloud of points, not a photo, so it shows walls, floor and large equipment rather than fine detail. For assets mounted close together, pin them on the phone, where you can see which is which.

Rooms scanned with an early version of the Field app show a message instead of the 3D view. Scan the room again in the Field app to see it here.

## Find an asset from a work order

On a work order in the Field app, assets that are pinned in a room can be found with Asset View, which points you toward the asset and shows the distance.

## Safety

Label positions are approximate. Before working on an asset, confirm it by its tag or nameplate. Asset View is not a safety system and does not replace lockout or isolation procedures. Keep watching where you are going while the camera is up.

## Removing a scan

On **Sites → Locations**, an Administrator can choose **Delete scan** from the room's row menu. That removes the scan and the pins placed on it; the assets themselves are not changed. The room can be scanned again in the Field app.
