Asset View (beta)

Point the phone at a mechanical room and see each asset labelled in the camera view. Scan a room once in the Field app, then pin assets on the phone or on the room in 3D in the web app.

Asset View labels your assets in the camera view of the AssetLab Field iPhone app. Open a mechanical room, plant room or boiler room, look around, and each pinned asset shows its tag and name where it sits, including ones behind a panel or above a ceiling tile. Tap a label to open the asset.

What you need

Scan a room

An Administrator does this once per room, in the Field app:

  1. Scan the room's location QR code and choose Asset View.
  2. Tap Scan this room and walk slowly around the whole room with the camera until the scan saves.
  3. Aim the + at an asset, tap Pin and choose it from the list. Only that room's assets are listed. Pins save as you go.

After that, anyone on staff who opens the room sees every pinned asset labelled. Each scan appears in the web app under Sites → Locations, in the Room scan column, with the scan date and the number of assets pinned.

View a room in 3D in the web app

Any scanned room can be opened in 3D from the web app: on Sites → Locations, click View in 3D in the room's Room scan column.

Drag to turn the room, scroll to zoom, and right-drag or two-finger drag to pan. Pinned assets show as labelled dots, and the list beside the room names each one.

The Display panel beside the room changes how the scan is drawn, for you only. It does not change the scan or any pin:

Your settings save to your account as you change them: every room you open in 3D then uses them, on any browser you sign in to. Reset to default puts the default view back and saves that too.

To measure between two spots, click Measure, then click the first and second points on the scan. The line is labelled with its length, and the list shows how much of it is level and how much vertical, for checking a doorway or clearance. Keep clicking pairs to measure more; Clear removes them and Done stops measuring. Measurements are not saved and disappear when you leave the page. Anyone who can open the room can measure.

Administrators can also manage pins here:

  1. Click Pin an asset, then click the spot on the scan where the asset sits.
  2. Choose the asset. Assets in that room are listed first, then the rest of the building.
  3. Click Pin here.

Use the buttons beside a pin in the list to move it (then click its new spot) or unpin it. A pin placed or moved in the web app shows on the phone the next time someone opens that room, with no app update.

Rooms scanned with an early version of the Field app show a message instead of the 3D view. Scan the room again in the Field app to see it here.

Find an asset from a work order

On a work order in the Field app, assets that are pinned in a room can be found with Asset View, which points you toward the asset and shows the distance.

Safety

Label positions are approximate. Before working on an asset, confirm it by its tag or nameplate. Asset View is not a safety system and does not replace lockout or isolation procedures. Keep watching where you are going while the camera is up.

Removing a scan

On Sites → Locations, an Administrator can choose Delete scan from the room's row menu. That removes the scan and the pins placed on it; the assets themselves are not changed. The room can be scanned again in the Field app.